
Sharpening stones
Japanese sharpening and honing stones.
-
Naniwa Trueing Block
18,82 €Naniwa Hard ceramic block for trueing Japanese waterstones quickly and accurately. The stones are worked wet on the block until plane. Silicon carbide abrasive. Size: 170 x 50 x 30 mm, grain 220.
-
Piedra afilado Gr. 220
40,39 €Super stone series, or grinding down notches for restoring dull blades. Size: 210 mm x 70 mm x 20 mm.
-
Sharpening stone Gr. 400
42,95 €Naniwa Superstone Grit 400, for grinding down notches, for restoring dull blades. Size: 210 mm x 70 mm x 20 mm
-
Sharpenign stone Grit 800
45,32 €Super stone series, sharpening stone grain size 800, for fast sharpening. Size: 210 mm x 70 mm x 20 mm
-
Piedra afilado Gr. 1000
49,71 €Super stone series, sharpening stone grain size 1000, for general sharpening purpose. Size: 210 mm x 70 mm x 20 mm
-
Piedra asentar Gr. 3000
59,76 €Top stone series, honing stone grain size 3000, for removing the burr after sharpening or to use between 1000 and 8000 grit stone. Size: 210 mm x 70 mm x 20 mm.
-
Naniwa sharpening stone Grit 5000
66,55 €Naniwa sharpening stone, grit 5000. Size: 210 x 70 x 20 mm
-
Piedra afilado Gr. 8000
74,57 €Super stone series, honing stone grain size 8000, for removing the burr after sharpening and to achieve a polished blade. Size: 210 mm x 70 mm x 20 mm.
-
Honing stone grit 10000
84,44 €Honing stone grit 10000, this stone is particularly suitable for the final polishing of knife blades. The hard bond allows a very flat stone with a high polishing effect. Size: 210 x 70 x 20 mm
-
Super Stone Grit 12000
92,62 €Honing stone grit 12000, this stone is particularly suitable for the final polishing of knife blades. The hard bond allows a very flat stone with a high polishing effect. Size: 210 x 70 x 20 mm
-
Japanese stone grit 800 / 5000
83,51 €Combination super stone series, honing stone grain size 800/5000, for sharpening and honing. Size: 210 mm x 70 mm x 20 mm.
-
Piedra Combinada Gr. 3000/8000
101,73 €Naniwa combination Superstone series, honing stone grain size 3000/8000, for removing the burr after sharpening and to achieve a polished blade. Size: 210 mm x 70 mm x 20 mm.